• A set of four (4) rollers to aid when installing or removing your Roof Top Tent or other cumbersome items on/off your roof rack.
• Bolt two (2) rollers on the last slat of your rack. The combined slat for a Slimline II Kit or the last slat on a Slimsport Kit.
• The other two (2) rollers bolt towards the front of your rack. Place the rollers one (1) slat behind the installed Quick Release Tent Mount Kit / 4 Piece* sold separately.
• The rollers have an adjustable height of 53mm/2.1" - 80mm/3.2" from the top of the slat.
• When using the Quick Release Tent Mount Kit / 4 Piece, these rollers can accommodate tent tracks that are either flush with the base of the tent or up to 27mm high through their built in height adjustment.
• The rollers are unobtrusive and can be left on the rack with your Roof Top Tent.
• Made of high strength steel and finished in the same durable black powder-coating as the Front Runner racks.
• Each roller has a HDPE outer sleave to prevent damage to high-value items.
• The rollers can carry a load of 140kg/308lbs over all four (4) rollers.

Note: The Roller System will roll against your Roof Top Tent base. If you own a tent other Front Runner's Roof Top Tent, ensure that it has a hard base that would support its weight on the roller.

Consists of:

• 4 x Rollers
• Installation Kit
• Fitting Instructions

Materials used:

• Black powder-coated high strength steel
• Black HDPE Rollers

Product Dimensions:

• 108.5mm (4.3") x 81.5 (3.2") W x 53mm-80mm (2.1"-3.2") H

Weight:

• 2.4Kg (5.3 lbs)

Load Rating:

• 140Kg (308.7 lbs) Distributed over a minimum of 4 rollers