Helix M FOUR 24V 4-Channel Amplifier M FOUR 24V

Part No.
M FOUR 24V

Helix M FOUR 24V 4-Channel Amplifier M FOUR 24V

$695.00

We'll notify you if it becomes available.

Not sure if it Fits? Click "Parts Checker"

Parts Checker
Buy Now, Pay Later
4 payments of $173.75

Installation Available

Free Shipping*

Add to Wish List
Helix M FOUR 24V 4-Channel Amplifier M FOUR 24V

Helix M FOUR 24V 4-Channel Amplifier M FOUR 24V

$695.00

Description

If you like to rev up your front and rear speakers, the M FOUR - 24V Edition will be exactly the right "tool" to do so. With generously 100 Watts RMS per channel into both 4 Ohms and 2 Ohms load this amp will heat up your voice coils in no time despite its super-compact dimensions. On the other hand the M FOUR - 24V Edition stays totally cool thanks to the highly efficient Class D design topology. 3-channel or 2-channel configurations are possible as well, delivering up to 2 x 200 Watts RMS of clean and undistorted output power.

Needless to say that the M FOUR - 24V Edition is equipped with a bunch of intelligent attributes like "start-stop capability" and our proprietary "ADEP" highlevel input so that it easily deals with all installation challenges of modern cars. Finally the extensive audio features will offer a sound quality at its best.

Special features:

Smart highlevel input

The latest generation of OE car radios incorporates sophisticated possibilities of diagnosing the connected speakers. If a common amplifier will be hooked up failure messages and loss of specific features (e.g. fader function) quite often appear - but not with the M FOUR - 24V Edition.
The new ADEP circuit (Advanced Diagnostics Error Protection) avoids all these problems without loading the speaker outputs of the OE radio during high volumes unnecessarily.

Start-Stop capability

The switched power supply of the HELIX M FOUR - 24V Edition assures operation even if the battery's voltage drops down to 12 Volts during engine crank.

Specifications:

  • - @ 2 Ohms: 4 x 100 Watts
  • - @ 4 Ohms: 4 x 100 Watts
  • - bridged @ 4 Ohms: 2 x 200 Watts
  • Additional features: Active, adjustable crossover, input mode switch, Start-Stop capability, highlevel input with automatic turn on function and Advanced Diagnostics Error Protection (ADEP)
  • Amplifier technology: Class D
  • Bandpass: 15 Hz - 4,000 Hz adjustable
  • Damping factor: 100
  • Dimensions (H x W x D): 50 x 230 x 154 mm/; 2.00 x 9.06 x 6.06"
  • Distortion (THD): 0.0005
  • Frequency response: 10 Hz - 30,000 Hz
  • Fuse: 2 x 15 A Maxi-fuse (APX)
  • Highpass: 15 Hz - 4,000 Hz adjustable
  • Idle current: 550 mA
  • Input impedance highlevel: 9 - 33 Ohms
  • Input impedance RCA/Cinch: 20 kOhms
  • Input sensitivity: RCA/Cinch 0.5 - 6 Volts; Highlevel 1.3 - 13 Volts
  • Inputs: 4 x RCA/Cinch; 4 x Highlevel speaker input; 1 x Remote In
  • Lowpass: 40 Hz - 4,000 Hz adjustable
  • Max. output power per channel*: Up to 135 Watts RMS @ 4/2 Ohms
  • Operating temperature range: -40° C to +70° C
  • Operating voltage: 18 - 36 Volts (max. 5 sec. down to 12 Volts)
  • Outputs: 4 x Speaker output
  • Power rating: DC 24 V = 25 A max.
  • Signal-to-noise ratio analog input: 98 dB (A-weighted)
  • Slope high-/lowpass: 12 dB/Oct.

Includes:

  • 1 x Amplifier HELIX M FOUR - 24V Edition
  • 1 x Mounting material
  • 1 x Instruction manual