A specially formulated adhesive and primer system which delivers a strong and shock resistant bond on all plastics*, even polyethylene, polypropylene & ABS.

Features

• Strong bond on all plastics*, even difficult rigid plastics like polyethylene, polypropylene & ABS
• Shock resistant, giving you a longer lasting fix
• Fast setting in 30 seconds
• Also bonds plastic to non-plastic materials such as metals, timber, china, rubber, leather and paper
• *Does not work on PTFE (teflon)

Where can this product be used?

• To repair plastic items made of PP, PE and ABS, e.g. plastic toys, office items, remote control

What materials is this product suitable for?

• ALL plastics* including polyethylene, polypropylene and ABS
• Metals
• Timber
• China
• Rubber
• Leather
• Paper

How to Use

1. Use the primer pen to apply one coat on each plastic surface to be bonded. Primer pen will appear clear on surface.
2. Pierce seal at end of adhesive tube by attaching nozzle & cap and turning clockwise.
3. Remove cap and apply a small amount of glue to one surface only.

Limitations:

• Not suitable for glass or foam, use Selleys Araldite Ultra Clear for glass or Selleys Power Grip Original for polystyrene foam. 
• Product only works on some rubbers and will not work on PTFE. May cause leather to harden or discolour, test on an inconspicuous area first.

Handy Tips

A specially formulated adhesive and primer system which delivers a strong and shock resistant bond on all plastics*, even polyethylene, polypropylene & ABS.

Features

• Strong bond on all plastics*, even difficult rigid plastics like polyethylene, polypropylene & ABS
• Shock resistant, giving you a longer lasting fix
• Fast setting in 30 seconds
• Also bonds plastic to non-plastic materials such as metals, timber, china, rubber, leather and paper
• *Does not work on PTFE (teflon)

Where can this product be used?

• To repair plastic items made of PP, PE and ABS, e.g. plastic toys, office items, remote control

What materials is this product suitable for?

• ALL plastics* including polyethylene, polypropylene and ABS
• Metals
• Timber
• China
• Rubber
• Leather
• Paper

How to Use

1. Use the primer pen to apply one coat on each plastic surface to be bonded. Primer pen will appear clear on surface.
2. Pierce seal at end of adhesive tube by attaching nozzle & cap and turning clockwise.
3. Remove cap and apply a small amount of glue to one surface only.

Limitations

• Not suitable for glass or foam, use Selleys Araldite Ultra Clear for glass or Selleys Power Grip Original for polystyrene foam. 
• Product only works on some rubbers and will not work on PTFE. May cause leather to harden or discolour, test on an inconspicuous area first.

Handy Tips

• If primer pen appears dry, test by drawing a line on a piece of paper, a wet mark should be evident.
• If using on leather or clear plastic, test on an inconspicuous area first as adhesive may discolour or cause leather to harden. 
• Best results for nylon items (e.g. small car parts), PVC and polystyrene are achieved without priming. Contact Selleys Consumer Advice if unsure on plastic type.
• Do not use primer on non-plastic surfaces.

Cleanup

• Uncured product may be removed with water.
• Cured product can be removed by scraping.