HighBeam Output Interface - Subaru

Adding a lightbar or set of driving lights to your Subaru Crosstrek or WRX has never been easier

How Does It Work?

Modern vehicles have all the features you need, just sometimes the lighting output at high beam doesn't cut it. The CANM8 CANNECT HIGHBEAM is an ideal solution for vehicles which require the installation of additional driving lights (via a relay) which are switched on when the vehicle high beam is active.

By installing into the vehicles digital CAN network, the CANNECT Highbeam interface converts the signal to a low ampere 12v output for your driving light circuit.

What Do You Get?

The C8NECTHIGHBEAM includes

• 1x Vehicle Interface
• 1x Bare Wire Harness
• Subaru Specific software for 2022- Up Crosstrek & WRX models ONLY

COMPATIBILTY NOTES

• Some Vehicles Auto Headlight Dimming May Not Be Retained
• Interface is NOT designed to direct drive lightbars or driving lights. You still need to install a wiring harness for your lights (NOT INCLUDED)

This is not a universal interface. It is ONLY compatible with the Subaru vehicles listed.

Installation Details

The interface features a mini wiring connector, which unplugs to allow easy installation. There are 2 connections to the vehicle CAN Bus wiring (CAN HI & CAN LO) along with a connection to a permanent, fused 12v power supply and an earth connection.

The interface incorporates a multi-function status LED, which indicates correct connection to the CAN system, CAN activity present and confirmation that the CAN identity has been recognised.

LED Status Details

• Flashing Red: Searching for CAN information.
• Solid Red: CAN Data received but vehicle not yet identified.
• Solid Green: CAN Data received and vehicle type recognised.
• Flashing Green: Vehicle speed detected.

Wiring Harness Details

• Red > Connect via a 5A fuse to a PERMANENT 12v supply.
• Black > Connect to a good chassis GROUND point.
• White > CAN HI Connection : Vehicle CAN HI wire.
• Blue > CAN LO Connection : Vehicle CAN LO wire.
• Purple > High Beam Output : 12v (1A max) when the high beam is active.