With a very linear and extended frequency response right down to the extreme treble, the LFR52 reproduces music with incredible resolution that will make you want to rediscover all your favorite tracks.

This kit consists of two 50 mm (2″) full-range speakers

• High-resolution full-range speaker 50 mm (2″)
• Max power 50 W -Nominal power 25 W*
• Frequency response 200 Hz -45 kHz
• Sensitivity 85 dB -Impedance 4 Ohms

Depends on cutoff frequency. 25W RMS if filtered above 300 Hz at 12 dB/octave

Composition

• Speaker 50 mm (2″)
• Max power 50 W / Nominal power 25 W
• Frequency response 200 Hz -45 kHz
• Sensitivity 85 dB -Impedance 4 Ohms
• Original BLAM cast aluminum bowl -Composite membrane in fiberglass and epoxy resin -Suspension butyl peripheral -Long life "Nomex" spider -20 mm coil on aluminum support -Ultra powerful motor with 40 mm x 5 mm neodymium ring -T-yoke equipped with a copper Faraday ring
  

Optimized to operate in an enclosed volume of 50 mL to 500 mL
Minimum recommended crossover frequency 250 Hz at 12 dB/octave

Accessories supplied:

• Fixing screws
• Protective grille
• User manual
• Closed inclined ABS speaker (pair)
• 100 µF capacitor (cut-off 6 dB/octave 400 Hz)