Enerdrive, Australia's premiere builder of portable power systems, offers a wide range of wholistic solutions purpose-built for specific intended use applications. These purpose-built systems are constructed in a way that takes all the guesswork out of finding the right combination of key components, assembled into an enclosure perfect for direct fitment into your canopy, RV or custom application. Not only do these systems make assembling the optimal system to suit your needs a breeze, but also make installation easy and straightforward.

The Adventurer 03 is Enerdrive's entry level variation of their Traveller Power Systems, which are designed for installation into the canopy of your dual cab or ute. It combines Enerdrive's ePower 40-Amp DC to DC converter, Simarine battery monitor and shunt expansion module, ePOWER 240VAC charger and ePOWER 2000W True Sine Wave Inverter into a specially designed enclosure optimised for top, left or right-side mounting, making it perfect for dual cab and ute owners in need of an auxiliary power system capable of powering both 12VDC and 240VAC operated devices and appliances, and charging from the alternator, a solar array or a 240VAC power source via a generator, on-site power connection or 240VAC wall outlet at home. If you don't need the ability to keep an eye on current flowing from power sources and/or out to various loads then opt for the Adventurer 01 or, if you simply don't need to monitor so many, then the Adventurer 02 is for you.

Adventurer Power Systems can be optioned with 200 (2.4kWh) or 300Ah (3.6kWh) of storage, depending on your reserve power requirements.

If you don't require the additional functionality of a 240VAC power outlet, then opt for a variant of the Traveller Power System or, if you don't need the ability to charge from a 240VAC source then opt for an Explorer Power System.

This Adventurer 03 package consists of the following:

• Simarine Battery Monitor with Individual Load Monitoring
• ePOWER DC2DC+ Charger
• ePOWER 40-Amp AC Charger
• ePOWER 2000W True Sine Wave Inverter with AC Transfer & Safety Switch
• BTEC 200Ah Lithium Battery

This power system comes packaged in a purpose-built housing designed to mount on the left side of a canopy, complete with all internal wiring, with fuses, controlled with weatherproof Contura switches and a signature green restart button. If you would like an alternate mounting configuration please consider the other packages available within this category.

Please note: this package is made to order with a lead time of three weeks. Please contact our staff for any customisation requests when ordering.

• 4x Pre-wired Circuit Breakers for main power equipment
• 4 x Contura switches for Lights & Auxiliary loads
• Pre-wired 35mm2 Main Battery Cable Connection with Main DC Fuse
• 1 x Fridge 50A Anderson Plug connection
• 1 x 12V Cigarette lighter plug & 1 x Dual 2.4A USB sockets
• Battery Reset button for kick starting your flat battery from the DC2DC+ Charger

• Part Number: SI-PICO-3

SIMARINE PICO sets new standards for marine battery and tank monitors in fields of design, functionality, connectivity and ease of use. The IP67 casing of the main unit is CNC-milled from a single piece of high quality 6000 series anodized aluminium (corrosion-proof). The 3.5-inch IPS LCD display is optically bonded with Anti-Reflective Gorilla Glass. The unique Real Time Battery Health algorithm ensures very precise battery state of charge and health measurements.

• Part Number: SI-SCQ50

Added functionality includes the ability to monitor in real time the consumption and generation of power in up to four channels. This is achieved with innovated combination of shunts and tank level modules which also means other vitals such as fluid levels and status can also be monitored using the dedicated Simarine smart phone app.

• Part Number: EN3DC40+

The Enerdrive ePOWER DC2DC+ Battery Charger is a fully automatic multistage, multi input battery charger with the ability to charge from either an alternator linked to a battery; or via solar power with the in built Maximum Power Point Tracking (MPPT) Solar Controller. With two inputs available, the main/house battery will be charged from either the engine while underway, or via the solar panels when stationary. The process to choose either engine or solar is fully automatic and both functions are controlled from within the unit itself without the need for external relays.

During normal operation the ePOWER DC2DC+ Battery Charger will do a full charge cycle to float stage on the house battery bank with ability to choose either GEL, AGM, Flooded, Custom Programmable or Lithium. Once float stage is reached the charger transitions to a power supply mode to support any on-board DC loads.
 

• Part Number: EN31240

The Enerdrive ePOWER 40A Battery Charger is a fully automatic, "set and forget" charger. It is designed to quickly and accurately recharge your batteries using algorithms that help maximise service life. Multistage smart charging technology enables the charger to be connected to your battery banks permanently.

• Multistage Charging: Fully automatic multistage battery charger with the ability to charge 3 separate battery banks.
• Separate Battery Banks: Isolated charging design where battery bank one is separate from battery bank two and three.
• Programmable: Battery bank 1 can be programmed with a different charge algorithm over banks 2 and 3.
• Current Control: User adjustable current output (e.g. Dial the 60amp unit back to run off a 1kVA generator).
• Smart Charging: The ePOWER 40A battery charger will regulate its output based on the loads connected to your battery banks.

• Part Number:  EN1120S-X

The ePOWER 2000W Inverter with AC Transfer & Safety Switch is one in a family of affordable, high quality, professional level inverters by Enerdrive. By using the latest power conversion technology, ePOWER inverters deliver clean and energy efficient true sine wave AC power from your DC supply.

This ePOWER Inverter incorporates a 16A AC Transfer Switch which allows for seamless AC power transfer between Mains/Generator and Inverter. This helps to keep your appliances running with almost no break time on AC transfer and allows for a much simpler installation on-board.

• Part Number: EPL-200BT-12V-G2

The Enerdrive B-TEC G2 battery provides 60% more usable power than its equivalent lead acid cousin and being nearly 50% lighter and 30% smaller makes for a superior alternative.

The battery is also equipped with an internal Battery Management System that can monitor and optimise each prismatic cell within the battery during normal operation. It will protect the battery pack from over charge, over discharge, over temperature & short circuit. The BMS helps to ensure safe and accurate operation of the battery.

The G2 now incorporates a 'Built-In Reset Button' making re-starting a flat battery a breeze. No longer do you need to apply a voltage to the battery terminals to wake up the battery. Press the button and within seconds, the battery will come back to life ready to accept a charge source to rejuvenate the battery.