Selleys Autofix Silicone Windscreen Sealant is a neutral cure black silicone R.T.V. rubber for sealing leaking windscreens quickly and effectively.

Features

• Prevents the penetration of water, dust and drafts.
• Forms a permanently waterproof seal which is unaffected by vibration and temperature extremes: withstands -60°C to 150°C.
• Shrinkage during curing is negligible, which means spaces filled with sealant stay filled after curing.
• Tack free in less than 1 hour.

Where can this product be used?

• Windows
• Windscreens
• Around rubber door seals

What materials is this product suitable for?

• Painted surfaces
• Glass
• Metal
• Rubber
• Most Plastics*
• *Not suitable for PE or PP

How to use

1. Remove any dirt or moisture between the rubber and windscreen glass. Clean with mineral turps and dry.
2. Pierce blind seal at end of tube. Cut and fit nozzle.
3. If possible, insert nozzle between rubber and glass or rubber and metal. Squeeze tube with a steady pressure, pushing the sealant ahead of the nozzle. This method will force the sealant in and smooth the surface at the same time.
4. If further smoothing is required, smooth before sealant skins.
5. After use, remove nozzle and replace with cap. Allow sealant to cure in nozzle and remove before next use.

Limitations

• Cannot be painted over.
• Available only in black. If clear colour is required use Selleys Roof & Gutter Silicone Sealant.

Handy Tips

• Avoid smearing excess sealant on glass or paintwork. Use masking tape for a neat appearance, or where clean-up is difficult.

Clean up

• Uncured product may be removed with mineral turps.
• Cured product can be removed by scraping or cutting.