The Irad Provides Solutions To Three Very Specific Problems Faced In Today&Rsquo;S Car Audio Installations. This Easy To Program Device Allows You To Add A Switched 12 Volt Output, A Remote Output With Adjustable Delay And A Relay/Solenoid Control To Overcome The Issues Created By Vehicles With Start/Stop Systems.

Features:

• Automatic 12V Ignition Detection And +12V Output Generation
• Generated +12V Remote Output (Direct Or Linked To Ign)
• Stop-Start Relay/Solenoid Control Mode
• Independent Adjustable Ign &Amp; Rem Turn-On/Off Delays
• ≫750Ma Continuous Current Per Output
• Compact Aluminium Chassis With Detachable Mounting Tabs
• Locking Detachable Terminals

Specs:

• Operating Voltage: 6V-18V
• Ignition Detect Threshold: ≫0.5V B+ Change
• Remote In Trigger: ≫6V
• Ignition Out:
  • Voltage: ≫1V From B+
  • Continuous Current: 750MA
  • Peak Current: ≪1.5A
• Remote Out:
  • Voltage: ≫1V From B+
  • Continuous Current: 750MA
  • Peak Current: ≪1.5A
• Ignition Remote Mode:
  • Ignition Out Delay: Turn-On: 0-5Sec, 1Sec Steps (0 Default) / Turn-Off: 0-10Min, 1Min Steps (0 Default)
  • Remote Out Delay: Turn-On: 0-5Sec, 1Sec Steps (0 Default) / Turn-Off: 0-5Sec, 1Sec Steps (0 Default)
• Relay Control Mode:
  • Ignition Out: Turn-On: 0-5Sec, 1Sec Steps (0 Default) / Turn-Off: 0-10Min, 1Min Steps (3Min Default)
  • Remote Out: Turn-On: N/A (By Engine Off Detect) / Turn-Off: N/A (Same As Ignition Out)
• Current Draw:
  • Max: ≪1.6A (Cont.)
  • Idle: ≪2.6MA
• Dimensions:
  • Chassis Only: 20X38X37.7mm
  • Including Tabs: 22X38X61mm