1/0 gauge complete power, ground and signal installation kit for two amplifiers.

• 17 feet of 1/0 AWG power wire
• 3 feet of 1/0 AWG ground wire
• 4 feet of 4 AWG power wire
• 4 feet of 4 AWG ground wire
• ANL/MAXI fuse holder and fuse
• 30 feet of 16 AWG speaker wire
• (3) 16 feet twisted pair RCAs
• (2) 4 AWG distribution block
• 20 feet of remote wire
• 300 Amp fuse

Features At A Glance

• FULL spec cable - meets or exceeds AWG (American Wire Gauge) requirements
• 1/0 AWG (53.5mm²) 4,704 strands
• 100% Pure Crystal-Oxygen Free Copper (PC-OFC)
• 4 AWG (21.1mm²) 1,862 strands
• Includes appropriate wire termination hardware
• 16 AWG (1.31mm²) 65 strands
• 1 Year Warranty

Technologies:

CTA-2015

Rockford Fosgate cables conform to the CTA-2015 industry standard. The standard specifies the exact amount of copper needed to indicate a specific wire diameter or gauge size (8 AWG, 4 AWG, etc). Some manufacturers substitute thicker insulation for copper. With Rockford Fosgate, you get exactly what you pay for.

Includes Power Wire

This amplifier kit includes power wire by including necessary cable for both B(+) and GND(-) connections. Additionally, amplifier kits include remote turn-on power wire. All cables in this kit conform to the CEA-2015 AWG specification.

Dual Amp Installation

This amplifier kit is designed to install two amps in one system. This includes all necessary cables for proper connection; power, ground, turn-on and RCA signal. All cables in this kit conform to the CEA-2015 AWG specification.

Includes Speaker Wire

This amplifier kit includes speaker wire. These cables connect the amplifier to the speakers. All wires in this kit conform to the CEA-2015 AWG specification.

Includes RCA Cables

This amplifier kit includes RCA patch cables. These are the necessary cables used to transfer low-level signal from the source unit to the amplifier, typically located in the rear of the vehicle.

Includes Fused Dist.

This amplifier kit includes fused distribution. It utilizes a stand-alone fuse holder that can be installed in a convenient place under the hood.