Not sure if it Fits? Click "Parts Checker"
Thinkware U1000D64 4K UHD Front & 1080P HD Rear Dash Cam Kit (U1000 PLUS) - 64GB
Buy Now, Pay Later
Description


ULTRA HIGH DEFINITION VIDEO QUALITY
Equipped with Sony STARVIS IMX515 Image Sensors, this lets you record crisp and clear 4K UHD 2160P front and 1080P HD rear cam videos be it daytime or nighttime. Even better, it sports a 135-degree front and 160° rear wide angle lens view that minimises blind spots across the board.


DYNAMIC 2K AT 60FPS
U1000 Plus also supports 2K QHD recording at 60 frames per second. High frame rate delivers both smoother and sharper image.


DUAL CHANNEL
Equipped with a second camera, this can take your surveillance capabilities to the next tier. Just add in the 1080P HD rear camera to the mix to get peace of mind across the board, as doing so lets you keep an eye on what’s happening behind your vehicle, included in 2 channel kits.


THINKWARE 5 CHANNEL MULTIPLEXER COMPATIBLE*
Record up to 5 channels with the New MULTMOD Multiplexer Module!
The module connects to the rear input of the dash cam and allows up to four additional cameras to be connected. The recorded footage from the additional cameras merge together to provide a single split screen 1080P FHD video file.
*Sold separately.


High Dynamic Range (HDR)
Corrects images through color balance adjustment in environments with strong sunlight or shadows.


Smart Auto-Exposure (AE)
Adjusts the exposure to record clear footage when there is strong sunlight or headlight.


Dewarping Video Technology
Minimizes image distortion typically caused by a wide angle lens, and delivers a close-to-real image of the world.




Continuous Recording Mode
Automatically activates as soon as the engine starts, this function lets you record videos that are saved in one-minute segments via an auto-looping mechanism.


Event Recording Mode
Active Impact Monitoring System, made possible by the built-in three-axis G-Sensor, automatically stores video data 10 seconds prior and after a collision.


Manual Recording Mode
Similar to how a typical video camera works, you use this mode to record events in front of your vehicle, whether or not it’s in motion, as they happen.


Advanced Parking Surveillance
Provides full surveillance capabilities whenever your vehicle is parked. It records motion and impacts while the vehicle is parked.


Audio / Voice Recording
Not only does it capture vivid videos, but it also records crystal-clear audio. This enables you to enjoy top-tier comprehensive surveillance capabilities to the fullest, too.
Parking Surveillance Mode
With hardwiring installation, enjoy parking protection against potential mishaps and hit-and-runs by capturing footage when an impact or motion is detected (hardwiring cable or OBD-II cable required). You can tailor the U1000 Plus' Parking Surveillance mode to the coverage that best fits your surveillance needs by choosing from Impact/Motion Detection, Time Lapse, or Energy Saving parking modes.


Smart Parking Mode
Smart Parking Mode feature prevents heat-related damage by automatically switching the U1000 Plus to a low-power mode if the temperature inside the vehicle gets too high during Parking Surveillance. In this state, the dash cam records incidents triggered by impacts only until its operating temperature is safe again to resume Motion Detection or Time Lapse Parking mode.


Impact and Motion Detection
With Impact and Motion Detection turned on, any potential vandalism attempts and hit-and-run drivers while the car is parked will be caught in the act. In Parking mode, Impact detection captures any impact to the vehicle while Motion Detection captures any movement around the vehicle.


Time Lapse
Time Lapse in Parking mode records footage at 2fps, enabling the dash cam to continuously record long periods of parking surveillance without increasing power consumption.


Energy Saving 2.0
Energy Saving 2.0 in Parking Surveillance mode records footage triggered by impacts only, allowing the U1000 Plus to reduce its power consumption and remain in Parking mode for a longer duration.
Thinkware Cloud


Live View*
Watch what is happening in real-time. Monitor your vehicle with your smartphone, no matter where you are. Live Resolution: 768x452p @15fps (available during Continuous Driving Mode)
* Live View: Up to 300 minutes per month. (Reset on every 1st day of the month)


Geo Fencing*
Aside from alerting you about the vehicle’s whereabouts, Geo-Fencing lets you know whenever your vehicle goes inside or outside a certain area. This will send you a push notification via the THINKWARE CLOUD mobile app. Even better, the Geo-Fence’s radius can be set by typing in the address or simply using a pin point on the mobile app itself.


Locate Vehicle*
This helps you find the vehicle’s real-time position using its Locate Vehicle function. As it updates every 10 seconds, it displays the current location, driving speed information and the direction it’s headed with the help of the Google Map.


Driving Impact Notification*
Using the THINKWARE Cloud app, this sends an alert to the user’s smartphone, should the vehicle figure in a collision or accident. On the other hand, the owner’s registered contacts can be notified in case the driver gets involved in a car crash, as well.
* The Thinkware Cloud features will only work when the vehicle ignition is on and the dash cam is in Continuous Driving Mode. The Thinkware Cloud App must be downloaded to the Smartphone and an account must be registered. The dash cam must be connected via hotspot to a smartphone or wifi dongle that is located within the vehicle at all time to use the Cloud Features. This requires an internet connection with data available. Carrier fees and charges will apply.









